程序系統工程(PSE)研究室

鄭智成 副教授

Dr. Jyh-Cheng Jeng (Associate Professor)

   

Tel: 02-2771-2171 Ext.2540; Email: jcjeng@ntut.edu.tw ;  Office: 生物科技館204

 

教學檔案下載

 

學 歷

 國立台灣大學 化學工程學 博士 2002    (Ph.D. in Chemical Engineering, National Taiwan University, 2002)
 國立中正大學 化學工程學 碩士 1997    (M.S. in Chemical Engineering, National Chung-Cheng University, 1997)
 國立台灣大學 化學工程學 學士 1995    (B.S. in Chemical Engineering, National Taiwan University, 1995)
 
經 歷

國立台北科技大學化學工程與生物科技系 副教授 (2012/08 ~ )

國立台北科技大學化學工程與生物科技系 助理教授 (2008/02 ~ 2012/07)

台灣積體電路製造股份有限公司(TSMC) 主任工程師 (2007/12 ~ 2008//01)

國立台北科技大學化學工程與生物科技系 兼任助理教授 (2006/08 ~ 2008/01)

國立台灣大學化學工程研究所 博士後研究 (2003/01~2003/07, 2003/10~2007/11)

 明新科技大學化學工程學系 兼任助理教授 (2005/08 ~ 2006/07)

 

研究專長與方向

 程序系統工程(程序設計、控制、最適化)  Process Systems Engineering (Process Design, Control, and Optimization)

 製程監控與失誤診斷  Process Monitoring and Fault Diagnosis

 動態系統建模與識別  Modeling and Identification of Dynamic Systems

 半導體製程之控制與偵錯  Semiconductor Manufacturing: Control and Fault Diagnosis

 

研究著作與成果

 A. 期刊論文(Journal Papers)

41.  J. C. Jeng*, “A model-free direct synthesis method for PI/PID controller design based on disturbance rejection”, Chemometrics and Intelligent Laboratory Systems, 147 (2015), 14-29. (SCI, EI)

40.  K. S. Chiu, J. C. Jeng, “Stability of oscillatory solutions of differential equations with general piecewise constant arguments of mixed type”, Mathematische Nachrichten, 288, (2015), 1085-1097. (SCI, EI)

39.  J. C. Jeng*, E. P. Fu, “Closed-Loop Tuning of Set-Point-Weighted Proportional−Integral− Derivative Controllers for Stable, Integrating, and Unstable Processes: A Unified Data-Based Method”, Ind. Eng. Chem. Res., 54, (2015), 1041-1058. (SCI, EI) 

38.  K. S. Chiu, M. Pinto, J. C. Jeng, “Existence and Global Convergence of Periodic Solutions in Recurrent Neural Network Models with a General Piecewise Alternately Advanced and Retarded Argument”, Acta Applicandae Mathematicae, 133, (2014), 133-152. (SCI, EI)

37.  J. C. Jeng*, “Simultaneous closed-loop tuning of cascade controllers based directly on set-point step-response data”, J. Process Control, 24 (2014), 652-662. (SCI, EI) 

36.  J. C. Jeng*, W. L. Tseng, M. S. Chiu, “A one-step tuning method for PID controllers with robustness specification using plant step-response data”, Chemical Engineering Research and Design, 92, (2014), 545-558. (SCI, EI)

35.  J. C. Jeng*, S. J. Liao, “A simultaneous tuning method for cascade control systems based on direct use of plant data”, Ind. Eng. Chem. Res., 52, (2013), 16820-16831. (SCI, EI) 

34.  J. C. Jeng*, W. C. Chen, “Control strategies for thermal budget and temperature uniformity in spike rapid thermal processing systems”, Computers & Chemical Engineering, 57,  (2013) 141-450. (SCI, EI)

33.  J. C. Jeng*, W. C. Chen, Control Strategy for Thermal Budget and Temperature Uniformity in Spike Rapid Thermal Processing Systems, Computers Aided Chemical Engineering, 31,  (2012) 1637-1641. (EI)

32.  J. C. Jeng*, M. W. Lee, “Simultaneous Automatic Tuning of Cascade Control Systems from Closed-loop Step Response Data”, J. Process Control, 22, (2012), 1020-1033. (SCI, EI)

31.  J. C. Jeng*, S. W. Lin, “Robust PID Controller Design for Stable/Integrating Processes with Inverse Response and Time Delay”, Ind. Eng. Chem. Res., 51, (2012), 2652-2665. (SCI, EI)

30.  J. C. Jeng*, “Closed-Loop Identification of Multivariable Systems, Using B-Spline Series Expansions for Step Responses”, Ind. Eng. Chem. Res., 51, (2012), 2376-2387. (SCI, EI)

29.  J. C. Jeng*, W. C. Chen, Nonlinear control strategy for thermal budget in spike rapid thermal processing systems based on Wiener model, Asia-Pacific J. Chemical Engineering, 7, (2012), S11-S19. (SCI)

28.  J. C. Jeng*, B. C. Lee, “Thermal Budget Control for Processes with Spike-Shaped Temperature Profile: Application to Rapid Thermal Annealing”, Asian J. Control, 14, (2012), 756-727. (SCI)

27.  A. Nasution, J. C. Jeng*, H. P. Huang, “A Simple Non-Minimum Phase Zero’s Predictor for Open Loop Unstable Processes”, Asia-Pacific J. Chemical Engineering, 6, (2011), 441-451. (SCI)

26.  A. Nasution, J. C. Jeng*, H. P. Huang, “Optimal H2 IMC-PID Controller with Set-Point Weighting for Time-Delayed Unstable Processes”, Ind. Eng. Chem. Res., 50, (2011), 4567-4578. (SCI, EI)

25. J. C. Jeng*, Y. Y. Lin, "Closed-Loop Identification of Dynamic Models for Multivariable Systems with Applications to Monitoring and Redesign of Controllers", Ind. Eng. Chem. Res. 50, (2011), 1460-1472. (SCI, EI)

24. C. C. Li, J. C. Jeng*, "Multiple Sensor Fault Diagnosis for Dynamic Processes", ISA Transactions, 49,  (2010), 415-432. (SCI, EI)

23. J. C. Jeng*, "Adaptive Process Monitoring Using Efficient Recursive PCA and Moving Window PCA Algorithms", Journal of the Taiwan Institute of Chemical Engineers, 41, (2010), 475-481. (SCI, EI)

22. F. Y. Lin, J. C. Jeng, H. P. Huang, “Multivariable Control with Generalized Decoupling for Disturbance Rejection”, Ind. Eng. Chem. Res., 48, (2009), 9175-9185. (SCI, EI) 

21. J. C. Jeng and H. P. Huang, “Nonparametric Identification for Control of MIMO Hammerstein Systems”, Ind. Eng. Chem. Res., 47, (2008), 6640-6647. (SCI,  EI)

20. 鄭智成、黃孝平,“PID控制系統之性能評估化工55(2008), 37-46. (榮獲2009年化工傑作)

19.  J. C. Jeng, A. J. Su, C. C. Yu, and H. P. Huang, “Process Trend Monitoring Using Key Sensitivity Index”, AIChE J., 53, (2007), 2339-2350. (SCI, EI)

18.  J. C. Jeng*, C. C. Li, and H. P. Huang, “Fault Detection and Isolation for Dynamic Processes Using Recursive PCA Based on Filtering of Signals”, Asia-Pacific Journal of Chemical Engineering, 2, (2007), 501-509. (EI)

17.  H. P. Huang, F. Y. Lin, and J. C. Jeng, “Control Structure and Performance Assessment for Disturbance Rejection in MIMO Processes”, Ind. Eng. Chem. Res., 46, (2007), 9170-9178. (SCI, EI)

16.  A. J. Su, J. C. Jeng, H. P. Huang, C. C. Yu, S. Y. Hung, and C. K. Chao, “Control Relevant Issues in Semiconductor Manufacturing: Overview with Some New Results”, Control Engineering Practice, 15, (2007), 1268-1279. (SCI, EI)

15.  H. P. Huang, C. C. Li, and J. C. Jeng, “Multiple Multiplicative Fault Diagnosis for Dynamic Processes via Parameter Similarity Measures”, Ind. Eng. Chem. Res., 46, (2007), 4517-4530. (SCI, EI)

14.  J. C. Jeng, H. P. Huang, and F. Y. Lin, “Modified Relay Feedback Approach for Controller Tuning Based on Assessment of Gain and Phase Margins”, Ind. Eng. Chem. Res., 45, (2006), 4043-4051. (SCI, EI)

13.   J. C. Jeng, C. C. Li, and H. P. Huang, “Dynamic Processes Monitoring Using Predictive PCA”, Journal of the Chinese Institute of Engineers, 29, 2, (2006), 311-318. (SCI, EI)

12. J. C. Jeng and H. P. Huang, “Model-Based Autotuning Systems with Two-Degree-of-Freedom Control”, Journal of the Chinese Institute of Chemical Engineers, 37, 1, (2006), 95-102. (SCI, EI)

11. H. P. Huang, F. Y. Lin, and J. C. Jeng, “Multi-loop PID Controllers Design for MIMO Processes Containing Integrators(s)”, Journal of Chemical Engineering of Japan, 38, 9, (2005), 742-756. (SCI, EI)

10. 黃孝平、鄭智成控制系統之性能評估與線上監控 (2/3)工程科技通訊76(2005), 120-123.

9. H. P. Huang, J. C. Jeng, and K. Y. Luo, “Auto-tune System Using Single-run Relay Feedback Test and Model-based Controller Design”, Journal of Process Control, 15, (2005), 713-727. (SCI, EI)

8. J. C. Jeng, M. W. Lee, and H. P. Huang, “Identification of Block-Oriented Nonlinear Processes Using Designed Relay Feedback Tests”, Ind. Eng. Chem. Res., 44, (2005), 2145-2155. (SCI, EI)

7. M. W. Lee, H. P. Huang, and J. C. Jeng, “Identification and Controller Design for Nonlinear Processes Using Relay Feedback”, Journal of Chemical Engineering of Japan, 37, 10, (2004), 1194-1206. (SCI, EI)

6. H. P. Huang, J. C. Jeng, C. H. Chiang, and W. Pan, “A Direct Method for Multi-loop PI/PID Controller Design”, Journal of Process Control, 13, 8, (2003), 769-786. (SCI, EI)

5. H. P. Huang and J. C. Jeng, “Identification for Monitoring and Autotuning of PID Controllers”, Journal of Chemical Engineering of Japan, 36, 3, (2003), 284-296. (SCI, EI)

4. H. P. Huang and J. C. Jeng, “Assessment of Performance for Single Loop Control Systems”, AIChE Symposium Series-326, 98, (2002), 384-388.

3. H. P. Huang, M. L. Roan, and J. C. Jeng, “On-line Adaptive Tuning for PID Controllers”, IEE Proceedings-Control Theory and Applications, 149, 1, (2002), 60-67. (SCI)

2. H. P. Huang and J. C. Jeng, “Monitoring and Assessment of Performance for Single Loop Control Systems”, Ind. Eng. Chem. Res., 41, (2002), 1297-1309. (SCI, EI)

1. J. F. Leu, J. C. Jeng, and C. Hwang, “Computation of Battle-Lemaire Wavelets Using an FFT-Based Algorithm”, Journal of Scientific Computing, 13, 4, (1998), 485-504. (SCI, EI)

 

 B. 研討會論文(Conference Papers)

59.  J. C. Jeng*, “Design of decoupling model-predictive control for multivariable systemss”, 2016 AIChE Annual Meeting, Salt Lake City, USA, Nov., 2015.

58.  J. C. Jeng*, C. L. Huang,  “Data-Based Design Approach for Simplified Decoupling Control Systems”, The 13th International Conference on Automation Technology, Taipei, Taiwan, Nov., 2015.

57.  J. C. Jeng*, Y. W. Lin, M. W. Lee,  “Extended VRFT Method for Controller Design of Nonlinear Systems Based on Block-Oriented Model Structures”, 12th International Symposium on Process Systems Engineering and 25th European Symposium on Computer Aided Process Engineering, Copenhagen, Denmark., May, 2015.

56.  J. C. Jeng*, G. P. Ge, B. A. Chen,  “Model-Free Design of Feedback-Feedforward Controllers Using Closed-Loop Plant Data”, 2015 Symposium on Process Systems Engineering & Thermodynamics, Kinmen, Taiwan, Apr., 2015.

55.  H. C. Su, J. C. Jeng*, Z. W. Wu, M. W. Lee,  Optimization of Multi- Period Byproduct Gas Distribution System in the Iron and Steel Plant”, 2015 Symposium on Process Systems Engineering & Thermodynamics, Kinmen, Taiwan, Apr., 2015.

54.  J. C. Jeng*, Y. W. Lin,  Controller Design for Nonlinear Hammerstein and Wiener Systems Based on VRFT Method”, 24th European Symposium on Computer Aided Process Engineering, Budapest, Hungary, Jun., 2014.

53.  J. C. Jeng*, Y. W. Lin, M. W. Lee,  VRFT-Based Controller Design for Nonlinear Systems with Block-Oriented Model Structures”, 5th International Symposium on Advanced Control of Industrial Processes, Hiroshima, Japan, May, 2014.

52.  葉真旭,鄭智成*,李銘偉,以適應性VRFT方法設計質子交換膜燃料電池電力系統之整合控制,2014 Symposium on Process Systems Engineering & Thermodynamics, Sun Moon Lake, Taiwan, May, 2014.

51.  J. C. Jeng*, E. P. Fu, Design of 2DoF PID Controllers Directly from Plant Data for Stable/Integrating/Unstable Processes”, 2013 SICE Annual Conference, Nagoya, Japan, Sep., 2013.

50.  J. C. Jeng*, W. L. Tseng, M. W. Lee, A direct method for PID controller tuning with desired system robustness using step response data”, The 6th International Conference on Process Systems Engineering, Malaysia, Jun., 2013.

49.  J. C. Jeng*, X. C. Liao, Design of PID Controllers for Cascade Control Systems Directly from Plant Data”, 2012 CACS International Automatic Control Conference, Yunlin, Taiwan, Nov., 2012.

48. J. C. Jeng*, X. C. Liao, “PID Controller Design Directly from Closed-Loop Plant Data for Cascade Control Systems”, 23rd Chinese Process Control Conference, Xiamen, China, August 10-13, 2012.

47. J. C. Jeng*, W. C. Chen, Control Strategy for Thermal Budget and Temperature Uniformity in Spike Rapid Thermal Processing Systems, 11th International Symposium on Process Systems Engineering, Singapore, July 15-19, 2012.

46. J. C. Jeng*, M. W. Lee, Identification and Controller Tuning of Cascade Control Systems Based on Closed-Loop Step Responses”, 2012 International Symposium on Advanced Control of Chemical Processes, Singapore, July 10-13, 2012.

45.  J. C. Jeng*, W. L. Tseng, M. W. Lee, “Servo and Regulation PID Controller Design Directly from Closed-Loop Plant Data”, 2012 Symposium on Process Systems Engineering, Si-Tou, Taiwan, May 25-26, 2012.

44. J. C. Jeng*, C. H. Liu, “Decoupling the Identification of Linear and Nonlinear Parts in Block-Oriented Nonlinear Models Using Subspace Identification Approach”, SICE2011, Tokyo, Japan, September 13-17, 2011.

43. J. C. Jeng*, A. Nasution, H. P. Huang, “IMC Based Set-point Weighted PID Tuning for First Order Delay Unstable Process (FODUP)”, 2011 International Symposium on Advanced Control of Industrial Processes, Hangzhou, China, May 23-26, 2011.

42. J. C. Jeng*, S. W. Lin, “PID Controller Tuning Based on Smith-Type Compensator for Second-Order Processes with Inverse Response and Time Delay”, The 8th Asian Control Conference, Kaohsiung, Taiwan, May 15-18, 2011.

41. J. C. Jeng*, W. C. Chen, "Nonlinear Control Strategy for Rapid Thermal Processing Systems Based on Thermal Budget", 13th Asia Pacific Confederation of Chemical Engineering (APCChE 2010), Taipei, Oct., 2010.

40.  J. C. Jeng* and M. W. Lee, “Closed-Loop Identification of Complete Models for Multivariable Systems”, PSE Asia Symposium, Singapore, Jul., 2010.

    39. J. C. Jeng*, B. C. Lee, A. J. Su, C. C. Yu, "Thermal Budget Control for Rapid Thermal Processing Systems with Spike-Shaped Temperature Profile", 9th International Symposium on Dynamics and Control of Process Systems, Leuven, Belgium, Jul., 2010.

    38. J. C. Jeng* and Y. Y. Lin, “Identification of Complete Model for Multivariable Systems under Closed-Loop”, Proceedings of 2009 Symposium on PSE, Hsinchu, Taiwan, Dec., 2009, 186-190.

    37.  J. C. Jeng* and J. Y. Huang, “Simulation Studies on Prediction and Control of Blood Glucose for Type I Diabetes Based on Hammerstein Model”, TWIChE Annual Meeting, Taichung, Taiwan, Nov., 2009.

    36. B. C. Lee, A. J. Su, and J. C. Jeng*, “Thermal Budget Control for Processes with Spike-Shaped Temperature Profile: Application to Rapid Thermal Annealing”, CACS International Automatic Control Conference, Taipei, Taiwan, Nov., 2009.

    35.  J. C. Jeng*, “Closed-loop Identification of Process and Disturbance Models for Multivariable Systems”, AIChE Annual Meeting, Nashville, TN, Nov., 2009.

    34.  J. C. Jeng* and J. Y. Huang, “Simulation Studies on Nonlinear Control Strategies of Glucose for Type I Diabetes Based on Hammerstein Model”, AIChE Annual Meeting, Nashville, TN, Nov., 2009.

    33. J. C. Jeng* and M. W. Lee, “Closed-Loop Process Identification Using B-Spline Series”, 2008 Taiwan/Korea/Japan Chemical Engineering Conference, Taipei, Taiwan, Nov., 2008.

     32. H. P. Huang, F. Y. Lin, and J. C. Jeng, “A Generalized Design of Decoupling Multivariable Control for Disturbance Rejection”, IFAC World Congress, Seoul, Korea, 2008.

    31. A. J. Su, C. C. Yu, J. C. Jeng, H. P. Huang, C. J. Yang, H. W. Chiou and S. C. Yang, “Context-based State Estimation in Semiconductor Manufacturing: Reference Path Based State Transformation Approach”, IFAC World Congress, Seoul, Korea, 2008.

    30. J. C. Jeng* and H. P. Huang,  “Improving the Performance of On-line Process Monitoring Using Recursive PCA ”, PSE Asia 2007, Xi’An, P.R. China, 2007.

    29. J. C. Jeng* and M..W. Lee,  “Identification of Wiener-type Nonlinear Processes Using Relay Feedback and Sine Wave Test ”, PSE Asia 2007, Xi’An, P.R. China, 2007.

    28. H. P. Huang, J. C. Jeng, and J. K. Hsu, “A Modified EWMA Run-to-Run Control in Its Application to Semiconductor Manufacturing”, PSE Asia 2007, Xi’An, P.R. China, 2007.

   27. Y. L. Chen, J. C. Jeng, I. L. Chien and H. P. Huang, “Optimal Control for Type 1 Diabetes”, PSE Asia 2007, Xi’An, P.R. China, 2007.

26. J. C. Jeng and H. P. Huang, “Nonparametric Method for Identification of MIMO Hammerstein Models”, DYCOPS, Cancun, Mexico, Jun., 2007.

25. J. C. Jeng, A. J. Su, C. C. Yu, and H. P. Huang, “Process Monitoring Using Key Sensitivity Index: Applications to Semiconductor Manufacturing”, DYCOPS, Cancun, Mexico, Jun., 2007.

24. J. C. Jeng and H. P. Huang, “Modeling and Identification of Multivariable Hammerstein Nonlinear Systems”, Proceedings of 2006 Symposium on PSE, Taipei, Taiwan, Dec., 2006, 140-145.

23. T. Y. Chen, L. C. Lin, J. C. Jeng, A. J. Su, H. P. Huang, and C. C. Yu, “Model-Based Control for Improved Uniformity in Low-Pressure Chemical Vapor Deposition”, 4th AEC/APC Symposium Asia, Taipei, Taiwan, Nov., 2006.

22. M. W. Lee and J. C. Jeng, “Identification of SOPDT Process with RHP Zero Using Relay Feedback Test”, Proceedings of 2006 Japan/Taiwan/Korea Chemical Engineering Conference, Kagoshima, Japan, Nov., 2006.

21. J. C. Jeng, A. J. Su, H. P. Huang, and C. C. Yu, “Batch Process Monitoring Using Key Sensitive Index: Applications to Semiconductor Manufacturing”, AIChE Annual Meeting, San Francisco, U.S.A, Nov., 2006.

     20. J. C. Jeng*, C. C. Li, and H. P. Huang, “Fault Detection and Isolation for Dynamic Processes Using Recursive PCA Based on Filtering of Signals”, Proceedings of 11th APCChE congress, Kuala Lumpur, Malaysia, 2006.

19. J. C. Jeng and H. P. Huang, “Performance Assessment and Controller Design for Unknown Systems Based on Gain and Phase Margins Using Modified Relay Feedback”, ESCAPE-16+PSE2006, Garmisch-Partenkirchen, Germany, Jul., 2006.

18. C. C. Yu, A. J. Su, J. C Jeng, H. P. Huang, S. Y. Hung, and C. K. Chao, “PSE Relevant Issues in Semiconductor Manufacturing: Application to Rapid Thermal Processing”, Proceedings of International Symposium on Advanced Control of Chemical Processes, Gramado, Brazil, Apr., 2006, 601-608.

17.  J. C. Jeng, A. J. Su, H. P. Huang, C. C. Yu, S. Wu, F. Chen, H. Lo, J. Wang, H. Yu, and M. S. Liang, “Batch Process Trend Monitoring Based on Key Sensitive Index”, 3rd AEC/APC Symposium Asia, Hsin-Chu, Taiwan, Dec., 2005.

16. J. C. Jeng and H. P. Huang, “Performance Assessment for Completely Unknown SISO and MIMO Systems Based on Gain and Phase Margins Using Modified Relay Feedback”, AIChE Annual Meeting, Cincinnati, U.S.A, 2005.

15. J. C. Jeng, H. P. Huang, and C. C. Li, “Dynamic Processes Monitoring Using Adaptive PCA”, Proceedings of AdCONIP’05, Seoul, Korea, 2005, 364-369.

14. J. C. Jeng, H. P. Huang, and J. H. Jiang, “Quantitative Performance Assessment of Cascade Control Systems”, AdCONIP’05, Seoul, Korea, 2005, 276-281.

13. J. C. Jeng and H. P. Huang, “Model-Based Autotuning of Two-Degree-of-Freedom Control Systems”, Proceedings of PSE Asia 2005, Seoul, Korea, 2005, 289-294.

12. J. C. Jeng and H. P. Huang, “Model-Based Autotuning System with Two-Degree-of-Freedom Control”, Proceedings of 2004 Symposium on PSE, Taichung, Taiwan, Dec., 2004, 359-365.

11. J. C. Jeng, H. P. Huang, and J. H. Jiang, “Assessment of Traded-off Performance for Single Loop PI/PID Control Systems”, Proceedings of 10th APCChE congress, Kitakyushu, Japan, 2004, A-321.

10. H. P. Huang, F. Y. Lin, and J. C. Jeng, “Controller Design for Integrating Processes in SISO and MIMO Systems”, The 7th International Conference on Dynamics and Control of Process Systems (DYCOPS 7), Boston, U.S.A., 2004.

9. H. P. Huang, J. C. Jeng, and F. Y. Lin, “Model-Based Autotuning System Using ANN and Relay Feedback Test”, The 7th International Conference on Dynamics and Control of Process Systems (DYCOPS 7), Boston, U.S.A., 2004.

8. H. P. Huang, K. Y. Luo, and J. C. Jeng, “Model-Based Auto-Tuning System Using Relay Feedback”, Proceedings of 7th International Symposium on Advanced Control of Chemical Processes, Hong-Kong, China, 2004.

7. C. W. Lai, T. C. Wang, M. W. Lee, H. S. You, and J. C. Jeng, “Introduction to DrLoop - A Software Module for Assessment of Control Loop Performance”, Proceedings of the IASTED International Conference on Modelling, Simulation and Optimatization, Banff, Alta., Canada , 2003, 68-71.

6. J. C. Jeng, H. P. Huang, and C. L. Chen, “Identification with Relay Feedback for Monitoring PID Control Performance”, Proceedings of 2002 Taiwan/Korea/Japan Chemical Engineering Conference, Taipei, Taiwan, 2002.

5. M. W. Lee, H. P. Huang, and J. C. Jeng, “Identification and Controller Design for Non-linear Processes Using Relay Feedback”, Proceedings of the 9th APCChE Congress and CHEMECA 2002, Christchurch, NZ, 2002.

4. H. P. Huang, J. C. Jeng, and C. L. Chen, “On-line Identification for Monitoring PID Control Performance Using Relay Feedback”, AdCONIP’02, Kumamoto, Japan, 2002.

3. H. P. Huang, J. C. Jeng, and C. H. Chiang, “Dynamic Loop Interactions and Multi-loop PID Controller Design”, IECON Proceedings (Industrial Electronics Conference), 3, Denver, Colorado, USA, 2001, 730-735.

2. H. P. Huang and J. C. Jeng, “Assessment of Performance for Single Loop Control Systems”, Proceedings of Chemical Process Control-6, Tucson, Arizona, USA, 2001, 511-515.

1. H. P. Huang and J. C. Jeng, “Assessment of Performance and Design for Single Loop Control Systems”, Proceedings of PSE Asia 2000, Kyoto, Japan, 2000, 315-320.

 

 C. 專書章節(Book Chapters)

     1.  H. P. Huang and J. C. Jeng, “Chapter 8. Process Reaction Curve and Relay Methods – Identification and PID Tuning”, in PID Control: New Identification and Design Methods,

          Ed. by M. A. Johnson and M. H. Moradi, Springer, (2005), 297-337.

 

 D. 專利(Patents)

  4. 李銘偉,鄭智成, 串級控制系統的設定方法, 中華民國專利發明第I-492009 (2015.07~2033.06)

  3. 李銘偉,陳丁碩,沈瑞富,鄭智成, 製程模型識別方法及裝置, 中華民國專利發明第I-476549 (2015.03~2033.07)

  2.   黃孝平,鄭智成, “PI/PID控制器於設定點追蹤與負荷干擾排除性能間最適交易之調諧方法, 中華民國專利發明第I-285802 (2008.08.21~2024.12.30)

  1.   黃孝平,鄭智成, 利用繼電器回饋測試識別FOPDT模式之方法, 中華民國專利發明第I-265391 (2006.11.01~2024.12.30)

 

 

 

歷史檔案